| |
|
| |
| |
 AMPLIFIER |
|
|
 |
| |
|
Back for 2009 is
the rejuvenated of Rubicon subwoofers! Modernized with today’s
technologies, the Rubies awesome cosmetics are only a cool shell for
the good stuff inside. Molded polypropylene/mica cones yield the
structural integrity required for woofers of this caliber.
Convoluted NBR rubber surrounds yield superior strength and
reliability. The dual voice coils are wound around Kapton formers
for strength and sufficient cooling.
If you loved the
old-school Rubicon woofers, the new Rubies will blow you away with
their vast improvements… |
FEATURE:-
-
Dual 4 Ohm KEISV Kapton Voice Coils
-
Polypropylene Injection Molded Cone
-
NBR-Rubber Surround
-
Nickel Plated 8 ga. Compression Wire
Terminal
-
Conex/Cotton Composite Spider
-
Texture Coat Finish on Stamped Steel
Basket
-
Suspension Integrated Tinsel Leads
-
Vented Back Plate
|
| |
|
Specification \ Model |
RBW
12 |
|
Fs (hz) |
29.93 |
|
Qms |
7.261 |
|
Vas (ft³) |
2.073 |
|
Cms (mm/n) |
0.179 |
|
Mms (g) |
157.6 |
|
Rms (kg/s) |
4.082 |
|
Xmax (mm) |
10.50 |
|
Xmech (mm) |
15.75 |
|
Dia (in²) |
9.732 |
|
Sd (in²) |
75.00 |
|
Vd (ft³) |
0.027 |
|
Qes |
0.838 |
|
Re (Ohm) |
7.2 |
|
Z (Ohm) |
8 |
|
BL (Gauss) |
15.96 |
|
Pe (watts) |
600 |
|
Qts |
0.751 |
|
NO |
0.182 |
|
1w/1m SPL (dB) |
84.61 |
|
2.8v SPL (dB) |
85.21 |
|
VC Dia. (in) |
2.5 DVC |
|
Impedance (Ohm) |
4 |
|
M-vd (ft³) |
0.125 |
|
| |
|
Sealed Box Specification |
RBW
12 |
|
Min. Sealed (ft³) |
1.00 |
|
Qtc |
1.273 |
|
F3 (Hz) |
39.97 |
|
Opt. Sealed (ft³) |
1.25 |
|
Qtc |
1.176 |
|
F3 (Hz) |
37.51 |
|
Max. Sealed (ft³) |
1.50 |
|
Qtc |
1.108 |
|
F3 (Hz) |
35.90 |
|
| |
|
Ported Box Specification |
RBW
12 |
|
Min. Vented (ft³) |
2.00 |
|
Port (dia. x length)
|
4x12 |
|
Fb (Hz) |
35.90 |
|
F3 (Hz) |
30.92 |
|
Opt. Vented (ft³) |
2.50 |
|
Port (dia. x length)
|
4x12 |
|
Fb (Hz) |
31.72 |
|
F3 (Hz) |
27.16 |
|
Max. Vented (ft³) |
3.00 |
|
Port (dia. x length)
|
4x12 |
|
Fb (Hz) |
28.72 |
|
F3 (Hz) |
24.50 |
|
| |
|
Measurements (in) |
RBW
12 |
|
Overall Diameter |
12.625 |
|
Overall Height |
7.125 |
|
Mounting Depth |
6.5 |
|
Cutout Diameter |
11.125 |
|
Flange Width |
0.75 |
|
Flange Height |
0.75 |
|
Weight (lb) |
12.8 |
|
| |
|
|
|
|
|
Copyright © Since 2003. Ban Leong Bros Pte Ltd. All rights reserved.
|
|
|
|
|
|
SHARE
IT ›››